If your warehouse has a ton of inventory that needs to move regularly, opting for a drive-in racking system as your high-density rack shelving solution is a good option. Traditional stack storage auctions mostly allow for multiple rows of pallet racking with the presence of aisles in between the individual rows. However, high-density storage shelving allows you to go for a much denser and compact arrangement of the products to be stored.
The drive-in and drive-through systems allow for the use of the available space with higher efficiency than the multi isle traditional pallet systems. This is because the drive-in and drive-through ones are compacted in the tighter region. Suppose you compare the drive-through and drive-in racking system with the conventional racking system. In that case, you will observe that the same amount of storage is used with a high-density drive-in or drive-through rack shelving and can be worked with 80% less space. Check out the drive in racking system Malaysia if you are planning to get these installed in your warehouse.
Drive-in pallet racks compared to selective pallet racking.
There are primarily two differences between the drive-in storage rack and the selective pallet storage. In the case of the drive-in system, the forklift truck is responsible for driving into the bay of the rack to get the stored product. In the case of selective racking, the product can be accessed from the back, front, sides, but the forklift does not go into the rack. No specified lanes are present between the rows. The bay’s length depends on you. If you want to install a pallet racking system, check out the pallet racking system Malaysia.
The primary advantage of the drive-through and drive-in rack systems is that they reduce the retrieval and storage time and increase productivity and efficiency. Not only does this provide a huge benefit to the operation, but it also reduces the cost by offering you more storage room per dollar on the racking budget. Since these racking systems allow for the creation of a uniform loading in a smaller storage region, the forklift operators can become more skillful in their driving operations. Along with this, these systems are extremely energy efficient. Since the product is compactly loaded, there is less air to warm or cool between the pallets. Furthermore, the forklift does not have to drive much far to pick up or place the loads. Therefore, the forklifts also use less fuel, increasing energy efficiency and reducing cost.
Pallet racking versus the drive-in racking system
The drive-in or drive-through racking system is not meant for every warehouse. However, it is very good at storing large palletized items in a smaller region. In the case of the pallet racking system, the pallets are allowed to move from back to the front. The pallets are positioned so that when one pallet is removed from the rack, the pallet that is next in line takes up the place of the previous pallet.